Publicité
Les langues disponibles
Les langues disponibles
3. Putting into Operation
3.1 Battery
The instrument is already supplied with batteries.
The battery status is indicated by a battery symbol
on the display (see section 7.1).
3.2 Preparation
Remove the safety cap from the electrodes.
Push the handle with the test tip L1 upwards and
detach it from the display part.
pull
For tests on earthing-contact sockets (Schuko), the
handle on the display part may remain locked in
place, for other tests as well as the self-test, it must
be disconnected.
21
Publicité
