Installation Conditions - Burkert 2875 Manuel D'utilisation

PTB 00 ATEX 2202 X
Application conditions
• For use in gas pumps:
Metal (brass, aluminum, stainless steel)
• Other applications:
Metal (brass, aluminum, stainless steel) or plastic
(e.g. polyamide PA 6 GV...)
Sheathing of the electrical connection lines:
• For terminal box design:
without connection line
• For cable design:
Rubber hose
5.2.2 Minimum dimensions
Valve body:
56 mm x 49 mm x 36 mm (L x W x H)
A larger valve body with improved thermal conductivity may
be used at any time.
5.2.3 Operating temperature range:
DANGER!
Risk of explosion!
If the max. permitted temperature values for the coil Type 7..-... are
exceeded, there is a danger of explosion.
▶ It is essential to observe the temperature specifications for the coil.
▶ Observe any restrictions by the max. permitted values for the
solenoid valve combined with the coil.
Type designation
Nominal voltage [V]
Current type
Rated current
Nominal power (W)
Temperature class
Ambient temperature (°C)
Voltage tolerance (%)

5.3 Installation conditions

The solenoid coils Type 7..-... are suitable for individual assembly only.
The connection lines must be laid permanently to protect against
damage.
Also observe the specifications in the chapter entitled "Tech-
nical data".
english
71. 72. 73.
12 ... 380
AC/DC
0.012 0.038 0.017 0.013
... 0.38 ... 1.2 ... 0.53 ... 0.42
5 15 7
T6 T4 T6
–40 ...
–40 ...+40
+60
±10% ±20%
735
6
T6
9