EINHELL GE-CR 30 Li Traduction Du Mode D'emploi D'origine page 10

•
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
•
Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER
WARNING: This product may contain lead,
phthalate or other chemicals known to the State
of California to cause cancer, birth defects and
other reproductive harm. Please wash your hands
after use.
Special safety information
•
Read the operating instructions carefully.
Familiarize yourself with the operator controls
and proper operation of the machine.
•
Never allow children or other persons who
are not familiar with the operating instructions
to use the equipment. Contact your local
governmental agency for information
regarding minimum age requirements for the
user.
•
Never work in the direct vicinity of persons -
especially children - or animals.
•
Always keep in mind that the machine
operator or user is responsible for accidents
involving other persons and/or their property.
Preliminary measures
•
Always wear sturdy, non-slip footwear and
long trousers when using the machine. Never
use the machine barefoot or in sandals.
•
Check all the ground on which the machine
will be used and remove all objects that could
be caught up and violently flung out by it.
•
Before using the machine, always visually
examine the tools for excessive wear or
damage. To prevent any imbalance, replace
worn out or damaged parts and mounting
bolts as a set only.
•
Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
Anl_GE_CR_30_Li_USA_SPK7.indb 10 Anl_GE_CR_30_Li_USA_SPK7.indb 10
EN
Handling
•
Only use the machine in broad daylight or in
well-lit conditions.
•
Always maintain good footing on inclines.
•
Only operate the machine at a walking pace.
•
Work perpendicular to the slope, never up or
down it.
•
Be particularly careful when you change
direction on a slope.
•
Do not work on overly steep inclines.
•
Be particularly careful when you turn the
machine around or pull it toward yourself.
•
Switch on the motor carefully as described
in the instructions from the manufacturer
and ensure that you keep your feet at a safe
distance from the tool.
•
Never move your hands or feet toward or
under any rotating parts.
•
Never lift or carry a machine whilst the motor
is running; in addition the safety plug should
be pulled out.
•
Switch the motor off whenever leaving the
machine.
•
If the machine begins to experience unusual
vibrations, switch it off immediately and check
it.
Maintenance and storage
•
Make sure that all nuts, bolts and screws are
tightened securely at all times to ensure that
the machine is in safe working condition.
•
Allow the engine to cool down before you put
the machine in an enclosed area.
•
For safety reasons, replace worn or damaged
parts.
•
Always switch the machine off and unplug the
safety plug before making any adjustments or
cleaning it.
•
Switch off the engine and pull the safety plug
out:
- before you dislodge any blockages or clogs.
- before you clean the machine, inspect it or
carry out work on the machine.
- after you have traveled over an obstacle.
- If you have struck a foreign object.
- if the equipment begins to experience
exceptionally strong vibrations
•
Do not touch the blades before the blades
have come to a complete stop and the safety
plug has been pulled out.
Keep this safety information in a safe place.
- 10 -
24.06.2019 11:08:28 24.06.2019 11:08:28