Spare Parts - Sinmag Europe Piccolo Mode D'emploi

Outside cleaning:
1. Wash the entire body with water and a soft and colourless detergent (washing-up
liquid for instance);
2. Thoroughly rinse and dry.
Never splash or immerse the machine in water.
Monthly, by an authorised agent:
1. Unplug the machine from the mains;
2. Release the 4 A screws and remove the lid;
3. Vacuum the inside of the machine;
4. Put back the lid and tighten the 4 A screws.
Every year, by an authorised agent:
1. Check the condition of the moulding belts;
2. Check the tension of the motor driving belt.

6. SPARE PARTS

When ordering spare parts, check with your authorised agent the parts concerned
using the spare parts catalogue published by the manufacturer.
Always provide the machine number as indicated on the rating plate.
7. TROUBLESHOOTING
The motor is not working
Check the power supply;
The products delivered have defects
Check that there is no dough or crust stuck on the cylinder. If the problem persist, call
on a trained user.
Always get an authorised dealer to carry out maintenance work on your machine!
✓
SINMAG EUROPE BVBA
✓
ENG
✓
7