Hella FF 50 Instructions De Montage page 11

Page 3:
Electrical connection
86
11
58/56b
Page 6: Accessories
(not included with kit)
Adapter mounting set
Disconnect earth lead (-) from
battery for safety.
Install relay with connection
terminals pointing downwards so
that they are protected against
splashing water.
If required, and legally permissible,
install switch in dashboard.
Lay and connect wires according to
circuit diagram.
According to circuit diagram
auxiliary lamps are switched on
together with the existing main
beams.
ø 12 mm
According to circuit diagram
auxiliary lamps can be switched on
in addition to the main beams with a
separate switch.
Reconnect earth lead (-) to battery.
Check lights, tighten connection
wires securely.
Have the driving lamps adjusted
at a workshop or service station.
Only properly adjusted lamps
provide optimum illumination.
I the
One more tip:
Keep the lenses clean. Dirt can
absorb up to 80% of the light.
You drive more safely when you
can see and be seen well. Do
you have spare bulbs and fuses
in your vehicle?
If you have any questions or
installation problems: Contact
your Hella stockist.
II the