4.3 CD / MP3 player
1) Insert a CD with the lettering facing up into the slot until it is pulled
in automatically
and / or
connect a USB flash drive to the USB port or connect a hard disk
(with individual power supply, if required) to the USB port
and / or
insert a memory card into the slot SD/ SDHC CARD, the notched
corner of the card facing up . To remove the card, slightly push it
in to eject the card from the slot .
2) The audio player can only be operated with the remote control
when the LED "CD" lights up . If the LED "TUNER" lights up, press
the button CD / TUNER on the remote control .
3) All other operating options are listed in the table . After operation,
switch off the unit with the POWER switch .
Button
on the remote control
on the unit
SELECT PLAY TYPE ×
FUNC
× × to switch between CD, USB port and memory card
II
×
×
PLAY/ PAUSE
1... 9, 10 / 0
× ×
REV − SKIP − CUE
×
×
FOLDER
× × to go to the first title of the previous / next folder
MUTE
× × to mute and unmute the sound
PLAY 1
×
Changing the information shown on the display
REMAIN
×
ID3
×
DISPLAY
×
10
CD / MP3 player
Function
Basic functions
sliding switch on the rear:
AUTO PLAY = The replay will start automatically after
the unit has been switched on
NORMAL = The unit will be set to pause after the unit
has been switched on
RANDOM /AUTO PLAY = Replay in random order will
start automatically after the unit has been switched on
to start the replay and
to switch between replay and pause
direct title selection, examples:
title
8 = buttons 8 and II
title 30 = buttons 3, 10 / 0 and II
title 125 = buttons 1, 2, 5 and II
beginning of title, previous / next title:
Press button briefly .
fast forward / reverse: Keep button pressed
single title replay (indication
1Ɗ
):
At the end of a title, the player is set to pause .
To start the next title, press the button II .
only when a CD-DA (Compact Disc Audio Digital)
is being replayed:
to change the information shown on the display
– time already played of the title
– remaining time of the title
– remaining time of the CD
only when MP3 files are being replayed:
to change the information shown in the upper line of
the display
– name of the file, the title, the artist and the album
will scroll through the upper line
– the type of the selected storage medium will be
indicated:
,
or
DISC
USB
CARD
only when MP3 files are being replayed:
to change the information shown in the lower line of
the display
– number and playing time of the title
– name of the folder
– name of the title
– number of folders and titles
1
4
7
DIRECT
M-DOWN
FOLDER
REPEAT
EJECT
MUTE
PLAY 1
CD / MP3 player
Button
on the remote control
Function
on the unit
Repeat functions
repeat of title section (continuous loop):
Press button at the beginning and at the end of the
A-B
× ×
section (minimum length of the section: 2 seconds) .
Press button once again to exit the loop .
repeat functions, random replay and intro function
basic setting
once
first actuation of button
the title selected will be repeated continuously
next actuation of button
all titles in the folder selected will be repeated
continuously
next actuation of button
REPEAT
× ×
all titles will be repeated continuously
next actuation of button
all titles will be replayed continuously in random
order
next actuation of button
all titles will be replayed once in random order
next actuation of button
intro function: the first 10 seconds of each title will
be replayed
next actuation of button
Alphabetic search for MP3 titles
alphabetic search for titles and folders
Title search
1 . Press FIND once Indication
2 . Select the 1
3 . Press the button PLAY to start the replay .
If there are multiple titles beginning with the
same letter, keep the button REV or CUE pressed
FIND
×
until the letter starts flashing; select the title with
REV − SKIP − CUE and then press the button PLAY to
start the replay of the title .
Folder search
1 . Press FIND twice Indication
2 . Select the folder with REV − SKIP − CUE .
3 . Press the button PLAY to start the replay of the first
title in the folder .
To program an individual title sequence
1 . Press the button STOP .
2 . Press the button PROG .
3 . for MP3 files only: Enter the folder number and
press the button PROG .
4 . Enter the title number and press the button PROG .
PROG
× ×
5 . Repeat these steps to program all further titles
(64 max .) .
6 . Press the button PROG to start the replay .
To delete or cancel the sequence,
press the button STOP .
To stop the replay
STOP
× × to stop the replay
EJECT
× × to eject the CD
PLAY
PAUSE
2
3
STOP
5
6
PROG
MEM
8
9
ASM
+10/- -
ID3
MO/ST
10/0
M-UP
DOWN
UP
REV – SKIP – CUE
FIND
SLEEP
FUNC
RDS
CD/TUNER
A-B
DISPLAY REMAIN
: all titles will be replayed
PLAY ALL
REPEAT TRACK
REPEAT FOLDER
REPEAT ALL
RANDOM REPEAT
RANDOM PLAY
INT PLAY
: basic setting
PLAY ALL
.
"A"
letter of the title with REV − SKIP − CUE .
st
.
Dir