FS IES3100-8TF-P Guide De Démarrage Rapide page 8

1 2 3 4 5
V1+ V1- V2- V2+
PWR1 PWR2
Positive (+) Pin Negative (-) Pin
Pin 1 / 5 Pin 2 / 4
NOTE:
The wire gauge for the terminal block should be in the range from 12 to 16 AWG.
Connecting the RJ45 Ports
1. Connect an Ethernet cable to the RJ45 port of a camera, outdoor AP, computer or other network
device.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
7