Equipment Maintenance And Repairs; Overview; Equipment Maintenance; Equipment Repairs - Cristec UECPS3/12–16/2D Manuel D'utilisation

4 EQUIPMENT MAINTENANCE AND REPAIRS

4.1

OVERVIEW

This paragraph deals with equipment maintenance and repairs. Proper operation of the product and its
service life are dependent on strict compliance with the following recommendations.
4.2

EQUIPMENT MAINTENANCE

Disconnect the shore power unit from the AC network before starting any maintenance work.
If appliances are in a dusty atmosphere, vacuum-clean them regularly, since dust deposits may adversely
affect heat release.
Check the state of battery charge every 3 months.
The tightness of nuts and screws should be checked annually to ensure efficient operation of the appliance
(particularly in hostile conditions: vibrations, shocks, high variations in temperature etc.).
A full technical inspection by a CRISTEC-accredited engineer is recommended every five years. It can also
be done at our plant.
4.3

EQUIPMENT REPAIRS

Disconnect the shore power unit from the AC power network and disconnect the batteries before undertaking
any repairs.
When fuses have blown, only use fuses of the type and size recommended in this manual.
Please contact a reseller or CRISTEC for any other repairs.

5 TECHNICAL SPECIFICATIONS

5.1 ENVIRONMENT, CASING, NORMS
Model
Environment
Operating temperature
Cooling
Relative humidity
Storage temperature
Casing
Material
Paintwork
Dimensions (length, height, depth) / Weight
Fixing centre distances
Fixing screw (wall)
Protection factor
Board protection
Standards
CE/EMC marking
CE/safety marking
UECPS3-12-16/25/40-DEA.DOC
12V-16A
Rated conditions : from - 10°C to + 55 °C; over, de-rating : reduction of the
output power < than 2,5 %/°C up to 65°C (charger function)
Natural cooling
Up to 70% (95% with no condensation)
-20°C to +70°C
Casing comprises :
•
steel cover and steel frame
•
aluminum heatsink
•
frame glossed black RAL9005
•
Cover satin gray RAL7047
414 x 130.2 x 202mm
3.6Kg
400 x 180mm
4 M6 round screws
IP20
Protected with water-repellent varnish (marine environment)
NF EN61000-6-1, NF EN61000-6-2, NF EN61000-6-3, NF 61000-6-4
NF EN60950, NF EN60335-2-29
12V-25A
414 x 130.2 x 202mm
3.7Kg
400 x 180mm
12V-40A
439 x 130.2 x 232.2mm
5.6Kg
422 x 180mm
27