Indicators - Cristec UECPS3/12–16/2D Manuel D'utilisation

Boost phase:
Absorption phase: begins when the voltage has reached the maximum BOOST level. The current level
These two phases combined last a maximum of T
15% of rated current, the floating phase automatically kicks in. Duration and current intensity depend on
how charged the battery is.
Floating phase:
Boost desactivated
With this setting, the CPS3 shore-power unit produces a single-stage UI type load curve. It generates a constant
voltage, supplying the current required by the battery(ies). Recharging time depends on the state of the battery,
being longer than when the boost is activated.

3.3.5 Indicators

3.3.5.1 Indicator "AC ON"
The "AC ON" Led indicates when ON that the shore power unit is AC powered.
3.3.5.2 Indicators charger fonction
INDICATOR
Green "ON" On
Off
Yellow On
"Boost/Absorption"
Flashing
Off
Yellow "Floating" On
Off
These indicators are visible from the front of the appliance through the light guides, thereby allowing operation
of the appliance to be monitored.
UECPS3-12-16/25/40-DEA.DOC
starts up automatically when the charger is turned on if the battery is flat. The current is
then at maximum output.
starts falling.
starts after T or if output current has reached 15% of the charger's rated current.
BOOST
The voltage switches to the Floating value and the rated current continues to drop.
STATE
- Charger is ON
- No or poor quality AC current
- Input fuse blown
or
- Internal shore power unit malfunction
or
- Cut-off of the main circuit breaker
or
- Boost desactivated
or - Boost activated and Boost/Absorption phase completed
- Boost activated and charger in Boost/Absorption phase
- Internal shore power unit malfunction
- Output fuse blown
or
Charger current < 15% of rated current (Floating phase)
Charger current > 15% rated current
(depending on setting). If the current falls below
BOOST
U out
charger
U floating
0
I out
charger
I nom
0
t
t
MEANING
26