Trevi XT 104 BT Mode D'emploi Et Branchement page 11

ENGLISH
POWER SUPPLY
Plug the power cord into the socket (13) on the device and plug into a power outlet.
BASIC FUNCTION
POWER ON/OFF
Press the POWER ON/OFF switch (14) and turn it to the "I" position to switch the appliance on.
Press the POWER ON/OFF switch (14) and turn it to the "0" position to switch off the appliance.
STAND-BY
1. Press the button
2. Press the button
MODE FUNCTION
To change the operating mode, press the MODE button (9) on the unit several times or press the MODE button (25)
on the remote control repeatedly.
VOLUME ADJUSTMENT
Press VOL + (6) button on the unit or the VOL + button (26) on the remote control to increase the volume
1.
Press VOL - (5) button on the unit or the VOL - button (27) on the remote control to decrease the volume
2.
FM RADIO
AUTOMATIC SEARCH
1. Turn ON the unit and make sure that it's in FM mode
2. Press SEARCH button (20) on the remote control to search and store radio channels automatically. The unit can
store 80 radio channels. After the search is finished, the unit will play the first channel.
3. Press (3) or
9 :
next or the previous radio channel.
4. If the channel signal is not good, it can be fine tuned by pressing and hold the
unit or the TUN + (28) or TUN - (29) buttons on the remote control to adjust the signal.
Note: For a better sound quality, please make sure that the FM Antennahas been fully extended.
USB/SD INPUT
1. Insert a USB memory in the socket (11) or an SD card in the input (10);
2. Turn on the unit, the playback of the tracks will start automatically, if this does not happen press the MODE button
(9) on the unit several times and select the USB/SD Card function, or press MODE button (25) on the remote
control.
3. To pause playback, press
4. To resume playback, press
5. Press (3) or
9 :
while listening to move to the previous or next
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cables.
- From the computer format the USB memory in FAT (16 or 32).
RECHARGE OF EXTERNAL DEVICES
The device can also be used to charge external devices such as smartphones, MP3 players, etc...
Make sure that the voltage and current supplied by the device are correct for the device to recharge.
Connect the external device to the USB CHARGE (12) jack.
(17) on the remote control to turn ON the unit.
(17) on the remote control to turn OFF the unit.
(8) button on the unit, or the
button (2) on the unit, or the

button again;

(8) button on the unit, or the
/CH- (18) or /CH+ (30) on remote control to select the
9 :
(32) button on the remote control;

/CH- (18) or /CH+ (30) button on the remote control,
9 :
track.
11
XT 104 BT
(3) or (8) button on the
9 :
;
.