Accessories
Side discs: used when cultivating between crops, for example carrots,
potatoes, to prevent them from being covered by earth. Side discs can also be
used if the tiller is used along a flagged path or a wall, or in soft earth.
Scarifier: used to aerate the lawn and remove dead grass from the lawn. The
grass will be greener and stronger, thus preventing moss in the lawn. The rear
bracket is necessary for fitting.
Push hoe: used to loosen the soil and thus remove weeds on paths and
entrances. The rear bracket is necessary for fitting.
Harrow: used to loosen the soil between crops and thus remove weeds.
The rear bracket is necessary for fitting.
Rake: used to rake paths and entrances with loose stones, for instance pebbles.
The rear bracket is necessary for fitting.
Ridge plough: used to plough up ground for potatoes, carrots and other root
crops. The rear bracket is necessary for fitting.
Digging claws: used if the soil is loose and the machine is to be operated with
a ridge plough or harrow instead of wheels.
Snow scraper: used to scrape snow from a solid surface, such as paving slabs.
Can be tilted to the left/right. The assembly plate is necessary for fitting.
Snow chains: used with snow scrapers if it is very slippery so the machine has
a better grip.
Weight blocks: used to give the machine a better grip when operating with a
trailer or snow scraper. Can only be fitted with wheels.
Intermediate blades: used to give the machine a greater tilling width. Also
makes the machine smoother to run and can be used with very loose soil.
Trailer: used to transport branches, etc. The rear bracket is necessary for
fitting.
Wheels: used to fit accessories, e.g. rake
Rear bracket: used to fit accessories.
14
Figure 25
Figure 18
Figure 30
Figure 17
Figure 30
Figure 16
Figure 30
Figure 15
Figure 30
Figure 20
Figure 30
Figure 21
Figure 24
Figure 23
Figure 29
Figure 27
Figure 28
Figure 18
Figure 30
Figure 22
Figure 30