Taking Out Of Service And Disposal; Technical Specifications - ASO Safety Solutions SK 32-31 Manuel D'utilisation

SK 32-31 + SK 32-33 Safet�� Rela�� 32-31 + SK 32-33 Safet�� Rela��

8. Taking out of service and disposal

The products manufactured by ASO are intended solely for commercial use (B2B). At the end of use, the
products are to be disposed of according to all local, regional and national regulations. Products can also be
returned to ASO, which will then dispose of them properly.

9. Technical specifications

Suppl�� voltage
Mains voltage
Low voltage
Power consumption
Terminating resistor - sensor
nominal value
upper switching point
lower switching point
Rela�� stages
nominal current DC
nominal current AC
Mechanical life-time
Safet�� rela�� switching times
Response time
Turn-off time
Housing
Polycarbonate with transparent cover
Dimensions (HxWxD)
Housing
incl. M16 screw-fittings 140 x 122 x 56 mm
for snap-on rail mounting
Protection class
with screw-fittings
with blanking plug
Weight
Temperature range
Connection cable cross-section
single- or fine-stranded cable 0,5-2,5 mm
Safet�� categor��
EN ISO 13849-1:2008 Category 3 PL d
MTTFd 180 years, DC 90%
(Electronic)
MTTFd 3757 ��ears
(Electromechanics)
B10d 1000000
MTTFd 190 years (Nop 52560)
16
Safet�� Rela�� Relay
U 230 V AC 50/60Hz
Netz
U 24 V AC/DC ±10%
E
P 3 VA
max
R 8,2 k�
A
R > 16 k�
AO
R < 5 k�
AU
3 A 30 V DC
3 A 250 V AC
>10 actuations
6
< 5 ms
approx. 200 ms
120 x 122 x 56 mm
122 x 116 x 37 mm
IP65
IP54
650 g
-20 °C to +55 °C
2
+Ub
Rre�
Stationar��
Opening
Ure�
+Ub
Rre�
Stationar��
Closing
Ure�
24V AC/DC
SK 32 block diagram
Rel
Stop
Opening
Rel
Stop
Closing
L1 N PE
Certificate no.
44 205 10 384655-001
Test report no.
10 205 384655-001