Cleaning The Display; Cleaning The Fittings - Gaggenau RF463704 Notice D'utilisation

Cleaning the display

The change in temperature and humidity can cause the
controls to steam up.
Switch the clean lock on before cleaning.
~ "Display lock for cleaning" on page 16
Use a clean micro-fiber cloth for cleaning.

Cleaning the fittings

To clean, take the variable parts out of the appliance.
~ "Equipment" on page 13
Ice cube container
9
CAUTION
A full ice cube container is heavy:
Pull the container out with both hands.
9
CAUTION
Risk of cold burns:
Avoid prolonged contact of the skin with frozen
food, ice and metal surfaces in the freezer
compartment.
To ensure you always have fresh ice cubes and to prevent
old ones from sticking together, remove them and clean
the ice cube container regularly.
1.
Lift the ice cube container.
2.
Slowly pull out the ice cube container.
3.
Empty and clean the ice cube container with lukewarm
water.
4.
Dry the inside of the ice cube container off well so
new ice cubes do not freeze and stick to it.
5.
Insert the ice cube container until it engages.
Note: If the ice cube container cannot be inserted,
rotate the conveyor and try again.
Drip tray
You can remove the drip tray to clean.
1.
Remove the grate for drips.
2.
Remove the drip tray.
3.
Empty and clean the drip tray with lukewarm water.
4.
Reinsert the drip tray and the grate for drips.
en-us
Cleaning
27