Peak Value Function; Menu - KERN and SOHN 4.3 Mode D'emploi

5.7.3

Peak value function

This function displays the highest load value (peak value) of a weighing.
Measuring frequency: 200ms
Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).

Switch on the balance, keep the HOLD-key pressed until the current setting „Hx"
(H1 – H6) appears.

Press ON/OFF button repeatedly until the setting „H6" is displayed.

Use the HOLD-key to confirm your selection

Suspend the material to be weighed

The peak value appears for a short time, symbolised by the [] top left. The
balance returns automatically to zero and is ready for further measurement.

6. Menu


When the balance is switched off, press the HOLD-key and keep it pressed

Do not release the HOLD-key. Press also the ON/OFF/TARE-key and keep it
pressed

Keep the ON/OFF/TARE-key pressed, however release the HOLD-key

Press HOLD-key anew

Keep both keys pressed until in the display "tr" appears

Release both keys. The balance is situated in the menu.

Using the ON/OFF/TARE button you can select between the following functions:
• tr (Zero tracking) : ON/OFF
• AF (Auto off): ON/OFF
• rST (reset to factory settings): YES / NO

Press the HOLD button to confirm the selected function

In the display appears the current setting „ON" or „OFF" resp. „YES" or „NO". You
can select between „ON" or „OFF" and/or „YES" or „NO" with the
ON/OFF/TARE button. Confirm your selection with the HOLD-key. After a short
period the balance returns automatically to weighing mode.
33 HCB_HCN-BA-e-1543