BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi page 13

[0-Position Correction]
0-Position Correction of Function Hand and Date Wheel:
1. Pull the crown out to Position (1) in the chronograph [CHR] mode to correct the function
hand and date wheel.
2. Click (turn) the crown to the left to align the date wheel.
(1) Clicking the crown once causes the function hand to make four revolutions and the
date to be corrected by one day.
(2) Turning the crown rapidly (clicking continuously two or more times) causes the
function hand to advance continuously. When stopping the function hand, click the
crown once to the right or left. When the function hand is not stopped manually, it
stops automatically after advancing 31 days.
The 12:00 position immediately after the date changes to the "1st" is the 0 position of the
function hand. After correcting the date wheel to the "31st" by turning the crown, press
button to finely correct the function hand so that the function hand is aligned at the
0 position after the date wheel changes to the "1st".
9