Hand 0-Position Check And Correction - BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi

D

HAND 0-POSITION CHECK AND CORRECTION

Before using this watch, check that the functions of the watch operate properly by
performing the following procedure.
0-Position: This refers to the base position of each hand that enables the
watch to function properly.
[0-Position Check]
1. Turn the crown to switch the watch to the chronograph [CHR] mode.
2. Pull the crown out to Position (1) to check the 0-position (function hand and date wheel
correction mode). Confirm that the 24 hour hand, hour hand, minute hand, second hand
and function hand rapidly advance to the 0 position, and the date wheel displays "1".
7