BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi page 17

[Setting the Date]
As a result of being equipped with an auto calendar function, it is not necessary to correct
the date at the end of each month. However, since the watch uses 28 days for the month
of February, it is necessary to correct the date at the end of February, but only in leap years.
24 .0
(1) Date correction position
.2
.8
6
18
.6 .4
12
Normal position
Date
Month
1. Turn the crown to switch the watch to the time/calendar [TME] mode.
2. When the crown is pulled out to Position (1) (date correction position), the second hand
rapidly advances to the month display position stored in memory and stops.
3. Click (turn) the crown to the left to set the date.
• Clicking the crown once to the left causes the function hand to make four revolutions
and the date to be corrected by one day.
13