BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi page 20

• Second hand:
Switches to the chronograph second hand. The second hand advances rapidly and
makes one revolution only when starting at 0 seconds, after which it moves in 1 second
increments to measure chronograph seconds
• Function hand:
Switches to either chronograph minutes or chronograph 1/20th seconds. The function
hand moves in one minute increments to measure chronograph minutes. When button
is pressed when the chronograph is stopped, the function hand switches to 1/20th
seconds display during time button
Note: 24 hour hand, hour hand, minute hand, date wheel:
• Continues to display the current time when the watch has been switched from the
time/calendar mode.
• Continues to display local time when the watch has been switched from the local time
mode.
• Continues to display the alarm set time when the watch has been switched form the
alarm mode.
[Chronograph Measurement]
1. Turn the crown to set the mode hand to the chronograph [CHR] mode.
2. Press button
whenever button
3. Continuously pressing button
chronograph second hand and chronograph minute hand to be reset to the 0 position.
Reset
16
to start and stop the chronograph. A confirmation tone is heard
is pressed.
Measurement
is pressed.
when the chronograph is stopped causes the
Stop
Pressed continuously