BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi page 16

2. When the crown is pulled out to Position (2) (time setting position), the second hand
rapidly advances to the 0 seconds position and stops.
Note: When the second hand does not stop at the 0 seconds position, reset the base
position in the "0-Position Correction Mode".
3. Click (turn) the crown to set the time.
(1) Clicking the crown once to the right causes the 24 hour hand, hour hand and
minute hand to move on the clockwise direction.
(2) Clicking the crown to the left causes the 24 hour hand, hour hand and minute hand
to move in the counter-clockwise direction.
•
Turning the crown rapidly (continuously clicking two or more times) causes the
hands to advance rapidly. When the hands are not stopped manually, they stop
automatically after being corrected by 12 hours.
4. Return the crown to the normal position in synchronization with a telephone time signal
or other time service.
12