BREIL CHRONO ALARM DUAL TIME AS10 Mode D'emploi page 24

3. Click (turn) the crown to set the alarm time.
(1) Clicking once to the right causes the hour and minute hands to move clockwise.
(2) Clicking once to the left causes the hour minute hands to move counter-clockwise.
• Turning the crown rapidly (continuous clicking two or more times) causes the hands
to advance rapidly. When stopping the hands, click the crown once to the right or
left. When the hands are not stopped manually, they stop automatically after being
corrected by 12 hours.
• Set the alarm while making sure to not to mistake AM and PM by referring to the 24
hour hand.
4. Return the crown to the normal position after setting the alarm time.
[Switching Alarm ON and OFF]
The alarm is switched ON and OFF each time button
pulled out to Position (1) or Position (2) in the alarm mode.
[Alarm Tone Monitor]
When the button
the alarm tone sounds for as long as button
[Stopping the Alarm Tone]
Press either button
20
is pressed with the crown in the normal position in the alarm mode,
or to stop the alarm tone while it is sounding.
is pressed when the crown is
is pressed.