Setting The Time And Date - BREIL FRAME TWIN Mode D'emploi

B

SETTING THE TIME AND DATE

To set the time:
1. Pull out the crown .
2. Turn the crown to set the hour and minute hands.
3. After the date has been set, push the crown back to the normal position.
To set the date:
1. Pull out the crown to the 1st position (1).
2. Turn the crown clockwise to set the date.
* If the date is set to an hour between 9:00 PM and 1:00 AM, the date may not change
on the following day.
3. After the date has been set, push the crown back to the normal position.
3