Cleaning The Shower Screen - KitchenAid KES2102 Mode D'emploi

CARE AND CLEANING
Wash the filter baskets, drip tray, drip
3
plate, water reservoir, and frothing
pitcher in the top rack of a dishwasher,
or by hand in warm, soapy water. If
washing by hand, be sure to rinse with
clean water and dry with a soft cloth.

Cleaning the shower screen

Once every 75 to 100 shots of espresso, the shower screen should be removed from the
brew head to clean thoroughly.
Using an allen wrench, remove the
1
screw at the center of the shower
screen by turning it counter-clockwise.
Once the screw is free, the shower
screen should drop from the brew head.
Place the shower screen into the
3
brew head with the smooth side
facing down, and attach with the
shower screen screw. Turn the
screw clockwise until snug.
Use the shower screen brush or a damp
4
cloth to brush or wipe coffee grounds
from the brew head gasket and
shower screen.
Wash the shower screen in warm,
2
soapy water, and rinse with clean
water. Do not wash the shower screen
in a dishwasher.
NOTE: When the shower screen is
attached, the center screw should be
flush with the surface of the screen. If
it is not, remove the screen, turn it over,
and re-attach.
27