Publicité
EB 500
SIGNALS
- Does not fasten the rivet
- Not ejected nail
GB
TROUBLE SHOOTING
CAUSE
- Battery low (yellow LED on)
- Nail container or protective cap
not mounted
- Slipping of the clamps on the nail - Perform clamps maintenance
- Rivet not suitable for the power of
the machine (red LED on)
- Incorrect nozzle
- Battery not suitable (yellow and
red LEDs alternately lit)
- Incorrect nozzle
- Full nails container
75036134 - EB 500 – rev 02 - ( 11-2021 )
SOLUTIONS
- Charge the battery or replace it
with a charged one
- Mount the nail container or the
protective cap
- Wait for the red LED to switch off
and use an adequate rivet
- Replace the nozzle as shown in
the table
- Replace the battery with a correct
type
- Replace the nozzle as shown
in the table
- Empty the container
43
Publicité
