Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
DEMOLITION HAMMER SAFETY WARNINGS
1. Wear ear protectors.
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Do not touch the bit during or immediately after
operation. The bit becomes very hot during operation
and could cause serious burns.
SPECIFICATIONS
Voltage (by areas)*
Power Input
Full-load Impact Rate
Weight (without cord, side handle)
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case ........................................................................... 1
(2) Bull Point .................................................................. 1
(3) Side Handle .............................................................. 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
Crushing
(1) Bull Point
Overall Length: 280, 450 mm
Asphalt Cutting
(1) Cutter
Surface Roughing
(1) Bushing Tool
Tamping
(1) Rammer
5
(2) Shank
(2) Shank
4. Wear earplugs to protect your ears during operation.
5. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
810W*
3000 min
4.8 kg
Anchor work (for self-drilling anchors)
Anchor size
(for impact)
No. 30 W3/8
No. 40 W1/2
No. 50 W5/8
Syringe (for debris removal)
Scooping Work
Cylinder case cover (For heat insulation of cylinder
case)
Cylinder case cover (rubber)
–1
(1) Anchor Adaptor
(for impact)
(2) Turning Handle
(3) Drift Key
(1) Scoop
Publicité
Table des Matières
