Using Your Machine; Putting Into Service; Cooking Pancakes - Brandt CR1500NR Manuel D'instructions

3)

USING YOUR MACHINE

a)

Putting into Service

Do not use the machine too close to curtains or any other flammable
materials.
 Install the required cooking plate depending on your preparation (one large pancake or 7
small pancakes).
 Plug in the machine. Turn the temperature selector (4) to Position ●●. Pre-heat your
appliance on Position ●● for 15 minutes.
 The temperature rise indicator comes on when the thermostat begins to work. When the
desired temperature is reached the thermostat cuts out and the indicator light goes out.
 After pre-heating for 15 minutes pour the pancake batter onto the plate.
b)

Cooking Pancakes

 After 15 minutes you can pour the pancake batter onto the plate.
 Make sure the amount of pancake batter is not excessive. If you use too much batter, this
could overflow and soil the machine.
 It is easy to see if the pancake is cooked. If the pancake batter does not stick to the plate
then the pancake is cooked.
 Once cooking is finished you can keep your pancake warm by turning the thermostat back
to Position ●.
 To remove the cooked pancake, use the spatulas supplied.
Do not use a metal or pointed object otherwise you could damage the
surface of the cooking plate.
TEMPERATURE
80 °C
240 °C
THERMOSTAT POSITION
20
●
●●