Preparing For Use; Assembling The Blender; Installing The Blender; Using Your Appliance - Brandt BLE250 Manuel D'instruction

b) Preparing for use
Before using the blender for the first time, clean the dispenser cap, jar lid, jar and blade
in warm soapy water and dry them thoroughly before assembling them again.
c) Assembling the blender
Unplug the appliance before carrying out any dismantling or assembly operations.
Install the jar sealing ring over the
1.
blending blade assembly.
Install the blending blade assembly
2.
over the jar base.
Attach the jar base to the jar by
3.
turning clockwise.
Put the ingredients (not bigger than 2
4.
cm) in the jar.
Press the lid into place.
5.
Install the jar onto the base.
6.
d) Installing the blender
 Place the assembled blender on a flat, stable surface.
 Before plugging in the blender, make sure the jar is correctly fitted and in
place on the motor base.
The blender has a safety lock system to ensure the appliance can only be
connected if the accessories are correctly fitted to the unit.

3) USING YOUR APPLIANCE

a) Operating instructions
Connect the blender to the power supply. When the appliance is plugged into the wall
socket, you may adjust the rotation speed or make a quick selection, depending on your
requirements:
Speed selection: Select the speed by turning the control knob on "1" or "2" in function

of the consistency of the food you wish to blend. Turn the control knob to position "0"
to switch the appliance off after 1 minute or less time.
18