Before Using Your Food Processor; Using Your Appliance; Using The Chopper - Brandt ROB506BG Manuel D'instruction

b) Before using your food processor
1. When unpacking the product and removing packing material, handle the Chopping Blade, and
Slice/Shred Disc carefully; they are very sharp.
2. Before using this appliance for the first time, clean the motor unit with a damp cloth.
3. Clean the shaft and blades in warm soapy water.
4. Dry all parts thoroughly.

3) USING YOUR APPLIANCE

a) Using the chopper
Assembly
- Place bowl (3) on top of motor unit (1), ensuring that the two closing fixtures interlock. Turn bowl
(3) in an clock-wise direction as far as it will go.
- Place the chopping blade (11) on the drive shaft.
- Put the food to be processed into bowl (3). Information on the maximum feeding amounts can be
found in the processing instructions.
- Take hold of lid (5) by the two outer grooved and ridged areas. Put the lid onto the bowl (4) in such
a way as to allow the L-shaped lug to be turned into the safety slit situated beneath switch. Turn the
lid in a clockwise direction as far as it will go. The lug on the lid must be seated in the slit. The
appliance can be started only if the lug on the lid is correctly positioned in the safety slit.
On / Off switch
Pulse: If you wish to chop food with short
pulses, puch the centrer of the button as
many times as you need
On: ON
Off: 0FF
17