Publicité
Les langues disponibles
Les langues disponibles
Connecting flexible tubes
Connecting the flexible tubes does not require using any tools. The entire system is connected together per scheme
on page 11.
1.
In order to join tube to fitting simply push the tube all the way into the fitting.
2.
After you have joined the tube, put on a locking clip (horseshoe-shaped red plastic clip) under the
collet to secure the connection.
3.
Check the connection you have made by pulling on the tube in outward direction.
4.
If you need to release tube from connection, take off the locking clip (a), push the collet back against
the fitting (b), and then gently pull out the tube (c), while keeping the collet depressed.
1
This manual is the intellectual property of BWT. Copying and reprinting is prohibited. © 2017
10
2
Tube connection
3
Tube disconnection
(a)
(b)
push
(c)
4
Publicité
