Aquatec® 90 Ergo
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
IMPORTANT!
Clean by hand
Maximum cleaning temperature:
– 60 °C by hand
– 85 °C for 3 minutes by autoclave
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
6 After Use
6.1 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
6.2 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
•
Inspection
•
Cleaning and disinfection
4
For detailed information, see 5 Maintenance, page 3 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
7 Technical Data
7.1 Dimensions, Weights and Materials (Fig. 7)
Dimensions
100 mm
A
410 mm
B
411 mm
C
Weights
Weight model without lid
Weight model with lid
Maximum user weight
Materials
Corpus
PP
All product components are corrosion resistant and do not
contain natural rubber latex.
7.2 Environmental Parameters
Operating Conditions
Ambient temperature
Relative humidity
Storage and Shipping Conditions
Ambient temperature
Relative humidity
1 Allgemein
1.1 Einleitung
Diese Gebrauchsanweisung enthält wichtige Informationen zur
Handhabung des Produkts. Lesen Sie die Gebrauchsanweisung
sorgfältig durch und befolgen Sie die Sicherheitsanweisungen,
damit eine sichere Verwendung des Produkts gewährleistet
ist.
Invacare behält sich das Recht vor, Produktspezifikationen
ohne vorherige Ankündigung abzuändern.
Vergewissern Sie sich vor dem Lesen dieses Dokuments,
dass Sie die aktuelle Fassung haben. Die jeweils aktuelle
Fassung können Sie als PDF-Datei von der Invacare-Website
herunterladen.
Wenn die gedruckte Ausführung des Dokuments für Sie
aufgrund der Schriftgröße schwer zu lesen ist, können Sie
die entsprechende PDF-Version von der Invacare-Website
herunterladen. Sie können das PDF-Dokument dann auf
dem Bildschirm so anzeigen, dass die Schriftgröße für Sie
angenehmer ist.
Bei einem ernsthaften Vorfall mit dem Produkt informieren
Sie bitte den Hersteller und die zuständige Behörde in Ihrem
Land.
1.2 kg
1.6 kg
225 kg
10 - 40 °C
15% - 93%, non-condensing
0 - 40 °C
30% - 75%, non-condensing
1649825-A
IdeI