Fortress Building Products PURE VIEW Instructions D'installation page 40

Step 2: Cut & Clean Rails
1. Cut rails using a saw with a fine tooth carbide cutting blade.
2. Use file to smooth cut edges.
3. Remove any metal shavings and dust with a brush or rag.
4. Make sure surfaces to be painted are clean.
Fig. 2
Fig. 1 Fig. 3
Step 3: Apply Spray Paint To Cut Areas
1. Using a piece of cardboard as a mask, apply the 1 coat of
st
Fortress zinc based touch-up paint.
2. Allow to dry before applying second coat.
3. Apply the 2nd coat of Fortress zinc based touch-up paint.
4. Allow to dry and install.
Fig. 1
2X
40
PURE VIEW: Al HOME GLASS BALUSTER INSTALLATION
13