Fortress Building Products PURE VIEW Instructions D'installation page 29

Fig. 2
Step 3: Determine Panel Length
1. Check to ensure that all posts are square and straight. Shim
posts as required.
2. Ensure that the Angle Bracket Cups are approximately
aligned.
3. With another person's help, measure the distance from the
inside back of one cup to the inside back of the other cup.
This will be the panel length. As shown in Fig. 2.
Fig. 1
Fig. 2
PURE VIEW: Al
Assembled Angle Bracket
Without Cap
Angle Bracket Cap
(To be installed in a later step)
Do not measure
from post
Measure from
back of bracket
HOME GLASS BALUSTER INSTALLATION
13
29