Fortress Building Products PURE VIEW Instructions D'installation page 13

Step 2: Install Bottom Rail
1. Install cut bottom rail into the lower installed brackets.
2. Pre-drill Bracket Cup holes for screws using a 3/16"
[89.5mm] drill bit.
3. Secure rail to Bracket Cups with provided T-25 Drive
Thread-Cutting Screws. Use low speed setting on drill.
Fig. 1
Fig. 2
Set
Screw
Step 3: Install Balusters Into Bottom Rail
1. Carefully slip Balusters vertically into each slot of the
bottom rail. Holes in balusters should not be visible after
insertion of baluster into rail. As shown in Fig. 1.
Tip:
• Be sure to wear safety gloves and goggles when handling
Glass.
PURE VIEW: Al
Al HOME Vertical Cable/
13
Pure View I-Support
HOME GLASS BALUSTER INSTALLATION
13
Straight
Bracket
Cup
Straight
Bracket
Cup
13