Sinmag Europe ELEVATO Mode D'emploi page 8

ENG
8. BOWL PLACEMENT
If the bowl is not correctly placed/positioned into the lift a signal wil
sound/light up and the lift will not start operating.
9. CLEANING AND MAINTENANCE
Warning. Ensure the machine is isolated from the power supply before
commencing cleaning or maintenance.
Caution. This unit is not water proof. Do not use water jet or spray to
clean interior or exterior of this unit.
Daily maintenance
Regular cleaning of the Lifter guarantees that it will always be in excellent operating
condition. You should always clean the Lifter at the end of each operating cycle.
Warning: Never use the following products to clean the bowl lift:
- Any type of solvents that may damage painted surfaces
- Petroleum, petrol, thinner, benzene or other related solvents
- Perchloroethylene or Trichloroethylene-based products
- Caustic soda, detergents or bleaches
8
• Bowl must be placed while Lifter is on ground
position
• Safety grid must always be placed to protect
operators
• Push firmly the bowl into the Lifter.
SINMAG EUROPE BVBA