Nolan N40 Sécurité Et Instructions D'utilisation page 21

N40 OK_N104 0072 14/01/14 16.07 Pagina 21
VENTILATION SYSTEM
The ventilation system of the N40 helmet consists of:
Front Air Intake:
coming from the front air intake by directing it in the top area of the rider's head
without any dispersion. The front air intake (Fig. 18) can be completely or partially
opened depending on whether its slider is pulled completely backwards (A). To close
the front air intake, pull the above mentioned slider completely forward (B).
Rear Extractors:
out ensuring an optimum comfort inside the helmet. (Fig. 19).
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication
system.
During communication system installation (see the specific instructions contained in
the N-Com kit) it will be necessary to remove the foam material lower back rest (if
present) and the foam material fillers located in the polystirene cheek pads next to
the N-Com earphones seats.
WARNING
- The lower back rest and the above mentioned fillers should be removed only if
the helmet is used with an installed N-Com compatible system.
the innovative AIRBOOSTER TECHNOLOGY channels the air
are integrated in a rear spoiler and allow warm and stale air to flow
21