Nolan N40 Sécurité Et Instructions D'utilisation page 17

N40 OK_N104 0072 14/01/14 16.07 Pagina 17
7. SIde Plates Assembly
To assemble the side plates first remove the lateral latches and (if assembled) the
peak and the visor (see instructions above).
7.1. Place the left side plate on the corresponding side mechanism centring its hole
on the mechanism and its teeth (Fig. 10).
7.2. If you wish to assemble the peak above the plates see the relevant installation
instructions.
7.3. Assemble the left lateral latch as indicated in the instructions above.
7.4. Follow the same steps on the right side of the helmet.
8. Side Plates Disassembly
To disassemble the side plates first remove the lateral latches and (if assembled) the
peak (see instructions above).
Then remove the plates from the side mechanisms.
Next, reassemble the visor and then the peak (if any) as explained in the previous
instructions.
WARNING
- When using the helmet in a configuration without the visor, always assemble
the lateral latches and the side plates.
- Do not use the helmet if the plates and the lateral latches have not been assem-
bled properly.
- If the peak is assembled over the plates the proper operation as described pre-
viously.
- Do not remove the side mechanisms from the shell.
- Should any of the side mechanisms fail or be damaged, please refer to a Nolan
authorized dealer.
VISION PROTECTION SYSTEM (VPS)
The exclusive inner VISION PROTECTION SYSTEM (VPS) is a LEXAN
nate moulded sun screen with scratch-resistant/fog-resistant treatment. Very simple
and practical to use. Just lower to activate it or lift to remove it from the field of vision.
It is useful in all sorts of situations, both on long journeys out of town and shorter
town trips.
Moreover, the innovative fastening system allows you to assemble and disassemble
the sun screen without the need for any tools for ordinary maintenance and cleaning
operations.
VPS Operation
The VPS mechanism allows activating the sun screen by simply lowering it until it
partially covers the visor field of vision. In this way, the desired light transmittance
reduction is achieved. At any time, without operating the visor, the VPS can be deac-
(*) LEXAN is a trademark of SABIC.
17
™
- polycarbo-
(*)