Nolan N40 Sécurité Et Instructions D'utilisation page 14

N40 OK_N104 0072 14/01/14 16.07 Pagina 14
INSTRUCTIONS FOR USE
The helmet N40 can be used with different configurations (Fig. 1): with visor and
peak, with visor only, with peak only, without visor and peak. Peak and side pla-
tes - which have to be assembled if the helmet is used without visor - are avai-
lable on the product itself, in the box or otherwise as accessory / spare parts -
depending on the version of the product.
LATERAL LATCHES
1. Lateral Latches Disassembly
1.1. Release the left safety cover from its lateral latch pulling it outwards - without
removing it (Fig. 2 A).
WARNING: pulling excessively the cover while releasing it from the latch
may cause damage to the cover or to the latch.
1.2. Turn the latch with the cover released upwards (Fig. 2 B).
1.3. Remove the latch with the cover from the helmet by pulling it outwards so that
the latch inner bayonets "A" come out of their housing in the side mechanism
(see Fig. 3).
1.4. Follow the same steps on the right side of the helmet.
2. Lateral Latches Assembly
2.1. Place the left side latch with its cover on the visor mechanism and insert the
inner bayonets "A" in their special housing in the side mechanism (Fig. 3).
2.2. Rotate the latch with its cover towards the rear part of the helmet (Fig. 2 B). Fix
the latch by positioning the safety cover (Fig. 2 A). Make sure the cover is fir-
mly attached to the latch.
2.3. Follow the same steps on the right side of the helmet.
WARNING
- Always ensure that the latches and the safety covers have been correctly
assembled and that they grip well to the side mechanisms.
- If your configuration of the helmet includes the visor and/or the peak try to acti-
vate them (see instructions below) and check that the latches remain still in
their position.
- Regardless of the configuration and accessories assembled on the helmet,
never use the helmet without having assembled the lateral latches correctly.
- Never remove the side mechanisms from the shell.
- Should any of the side mechanisms fail or be damaged, please refer to a Nolan
authorized dealer.
PEAK
(Available as standard only in some versions of the product or as an accessory/spare
part).
14