Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To Recall the Radio Presets
1.
Press the
2.
Press the
appear on the display. Press the
presets.
10 for AM radio (P01 to P10) and 10 for FM radio (P01 to P10)
Projection Unit
The Projection Unit will project the Time or the Temperature on a wall or ceiling
of a darkened room (maximum distance is 3-9 feet).
•
To turn the projected image ON/OFF, press the
•
Turn the Focus Adjustment Wheel (
unit) until the projected time/temperature is clearly shown on the ceiling or
wall.
•
To display the temperature, press and hold the
projection unit.
•
To flip the projected image (temperature or time) 180°, press the
button once.
AUX In
This clock radio is equipped with a convenient auxiliary input that allows you to
use your clock radio as a speaker for another audio device.
1.
Connect a 3.5mm cable (not included) into the
of the clock radio and connect the other end of the cable to the audio out
connection of your external audio device.
2.
Any device connected through the auxiliary input will override the radio
function when the radio is on.
3.
Operate the external audio device as you normally would. You can control
the volume with the clock radio
button on the front panel to turn the radio 'ON'.
button to select a preset. The current preset number will
There are 20 available presets.
button again to cycle through all radio
on the back of the projection
button on the back of the
connection on the back
or
buttons.
12
button.
Publicité
Table des Matières
