Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If you experience a problem with this unit, check the chart below before calling
for service.
SYMPTOM
Power does not come on
No sound
Noise or sound is distorted on
AM or FM radio
Incorrect time
Alarm does not turn on
Frequency Range (AM)
Frequency Range (FM)
Power Supply
Battery Backup
Specifications are subject to change without notice.
TROUBLESHOOTING
POSSIBLE CAUSE
GENERAL
AC cord not plugged in
RADIO
Power is not on
Volume control is at the mini-
mum position
AM: Interference
FM: Antenna wire not extended
CLOCK
Batteries inserted incorrectly,
not connected or dead
Clock not set
Alarm is not set to turn on
Clock is not set
Alarm time is not set
SPECIFICATIONS
520 - 1710 kHz
87.5 - 108 MHz
AC 120V ~ 60Hz, 5W
DC 3V CR2032 (battery included)
15
POSSIBLE SOLUTION
Insert plug firmly into AC outlet
Press power to turn the radio on
Turn the volume control up
Position the radio for better AM
reception
Extend antenna wire
Check batteries
Set the clock
Press and hold ALARM 1 or
ALARM 2 to turn on the alarm
Set the clock
Set alarm time
Publicité
Table des Matières
