Snooze Function; Display Content; Sleep Function; Radio Operation - Magnasonic MM176 K Guide De L'utilisateur

OPERATING INSTRUCTIONS
Action (during manual adjustment):
- Press << / MONTH-DAY / ° C/°F BUTTON (17) to adjust data backward.
- Press>> / YEAR / DST BUTTON (18) to adjust data forward.
Press and Hold << or >> button for 2 seconds to enable auto forward.
-
SETTING ALARM OUTPUT & ALARM ON/OFF
Changing Alarm Output
1. Press AL 1 (5) button / AL 2 (6) button to music
Buzzer position to select wake to Buzzer, set to Alarm off position to disable all alarms.
2. Select the Display Auto off / low / high dimmer (20) to the Auto off mode, display will turn on
automatically when alarm sounds.
ALARM LENGTH AND SNOOZE FUNCTION
Alarm Duration – Buzzer alarm or Radio alarm will continue to sound for 30 minutes if no keys
are pressed, it will stop automatically and be set for the next day.

SNOOZE FUNCTION

1. When alarm is activated, press Snooze button (3) will enable snooze function, Buzzer alarm
or Radio alarm will stop.
2. Snooze interval is 9 minute (not including one second offset)
3. Snooze will continue unless the On/Off button (4) is pressed. Buzzer alarm or Radio Alarm
will stop automatically after 30 minutes.
4. Select the display Auto Off / Low / High dimmer (20) to the AUTO OFF mode, when alarm
sounds the display will automatically turn on.
CHANGING THE DISPLAY CONTENT
1. Pressing the << / MONTH-DAY / °C/° F BUTTON (17) can switch the display to show the
month and day, after 5 seconds the display will timeout and return to display the time.
2. Pressing the >> / YEAR / DST BUTTON (18) can switch the display to show the year, after
5 seconds display will timeout and return back to display the time.
3. Press and hold the << / MONTH-DAY / °C/° F BUTTON (17) for 3 seconds to change
temperature unit °C/° F

SLEEP FUNCTION

1. While radio is on, press Snooze/Sleep button (3) to turn on Sleep mode, the sleep time will
keep flashing for 5 seconds, while flashing press the Sleep button to change the duration
from 90 min – 15 min. Press On/Off button (4) to cancel sleep function.
2. When radio is off, set the display Auto OFF / LOW / HIGH dimmer (20) button to the Auto
OFF mode, the LCD display light will automatically turn off in 15 seconds. Press any key to
turn the display light on and projection on.

RADIO OPERATION

1. Press the On/Off button (4) to turn radio on.
2. Select AM/FM band BY pressing the AM/FM band button (2).
3. Select the station using the Tuning Dial (23).
4. Turn the volume Dial (22) to adjust volume as required.
5. Press the On/Off button (4) to turn radio off.
Note:
- The AM band uses an internal directional aerial, rotate the radio for best reception.
-
Ensure that the FM antenna (14) is completely unrolled and extended for best FM reception
position to select wake to Radio, set to
- 5 –