To Recall The Radio Presets; Projection Unit; Aux In - Magnasonic SelfSet MM176K Guide De L'utilisateur

To Recall the Radio Presets

1. Press the button on the front panel to turn the radio 'ON'.
2. Press the button to select a preset. The current preset number will
appear on the display. Press the
presets.
There are 20 available presets.
10 for AM radio (P01 to P10) and 10 for FM radio (P01 to P10)

Projection Unit

The Projection Unit will project the Time or the Temperature on a wall or
ceiling of a darkened room (maximum distance is 3-9 feet).
• To turn the projected image ON/OFF, press the
• Turn the Focus Adjustment Wheel (
unit) until the projected time/temperature is clearly shown on the ceiling
or wall.
• To display the temperature, press and hold the
projection unit.
• To flip the projected image (temperature or time) 180°, press the
button once.

AUX In

This clock radio is equipped with a convenient auxiliary input that allows you to
use your clock radio as a speaker for another audio device.
1. Connect a 3.5mm cable (not included) into the
of the clock radio and connect the other end of the cable to the audio out
connection of your external audio device.
2. Any device connected through the auxiliary input will override the radio
function when the radio is on.
3. Operate the external audio device as you normally would. You can control
the volume with the clock radio
- 12 -
button again to cycle through all radio
button.
on the back of the projection
button on the back of the
connection on the back
or buttons.
DO NOT RETURN THIS
PRODUCT TO THE STORE
Please contact a MAGNASONIC customer support representative first
regarding any additional information on product features, specifications or
assistance with setup.
Please contact us via one of the methods below:
Support:
magnasonic.com/support
Online Web Chat:
magnasonic.com
For more product information visit magnasonic.com
NEED
HELP?
- 13 -