Télécharger Imprimer la page

Chicco oasys 2-3 FixPlus Evo Mode D'emploi page 22

Masquer les pouces Voir aussi pour oasys 2-3 FixPlus Evo:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
7. C onnect the car safety belt by threading the
lap belt trough the red lap belt guides (F) un-
der the two armrests in line, and by thread-
ing the diagonal belt under the armrest on
the side of the fastener buckle (Fig. 11).
8. P ull the diagonal part of the car seat belt up-
wards so the entire belt is taut and fits closely
over the child's legs and chest without being
too tight and check the correct positioning
of SAFE PAD (S) (Fig. 12).
WARNING! Check that the car safety belt is
tight enough.
WARNING!Check that the car safety belt is not
twisted (Fig. 13).
WARNING! Check that the diagonal safety belt
fits correctly across the child's shoulder (Fig.
12) and does not press on the neck; adjust the
backrest accordingly (see paragraph "ADJUST-
ING THE HEIGHT OF THE BACKREST").
WARNING!Check that the car safety belt ad-
juster is behind the backrest of the car seat (or
at least aligned to it) (Fig. 5).
WARNING! Do not fit the car safety belt in any
way other than that indicated in these instruc-
tions! (Fig. 14).
WARNING! Check that the child is strapped
into the child car seat correctly so that he can-
not slide forwards.
Check that any unused rigid clasps are hidden
away in the compartment at the back.
FITTING THE CHILD CAR SEAT INSIDE THE
VEHICLE USING SAFETY BELTS AND RIG-
ID FIXPLUS CLASPS AND PLACING THE
CHILD INSIDE
WARNING! Before installing the child car seat
using the FixPlus clasps, check the child car seat
is in a vertical and not reclined position.
WARNING! These instructions and diagrams
are for the installation of the child car seat on
the right back seat. To fit the child car seat in
other positions, carry out these operations in
the same order.
IMPORTANT! The child car seat MUST ALWAYS
be installed using the car safety belts. The rigid
FixPlus clasps are an additional device to the
use of car safety belts and aim to provide great-
er stability for the child car seat.
1. P lace the child car seat onto the vehicle seat
with the backrest up against the vehicle seat
backrest (Fig. 15).
WARNING! Check that the vehicle headrest
does not interfere with the child seat headrest:
it must not push it forwards (Fig. 6). If this hap-
pens, remove the car seat headrest. Remember
to replace the vehicle headrest when the child
car seat is removed and a passenger uses the
seat.
2. P ull the lever (O), located under the inclina-
tion adjuster button (H), upwards. (Fig. 16)
3. W hile keeping the lever pulled, pull out the
rigid clasps (P) completely from the rear of
the backrest (Fig. 17).
4. I nsert the two rigid clasps (P) into the cor-
responding ISOFIX anchorage points on the
car seat, located between the backrest and
the seat (Fig. 18).
WARNING! Check that the two indicators (Q)
are green which means the system has been
installed correctly (Fig.19).
5. P ush the child car seat firmly against the
backrest of the car seat (Fig. 20), pushing the
lever (O) to ensure maximum adherence of
the child car seat backrest against the car seat.
6. S it the child inside with his back against
the child car seat backrest and follow the
instructions 3-4-5-6-7-8 provided in the pre-
vious chapter to install the car safety belts,
(Fitting the child car seat inside the vehicle
using safety belts and rigid FixPlus clasps and
placing the child inside) paying attention to
every single detail.
HOW TO POSITION SAFE PAD
SAFE PAD (S) can be positioned on both sides
of the Car Seat depending on which seat the
Car Seat is installed.
To move it to the desired side, release it from
the diagonal belt guide (B) on the side it is in-
stalled by pressing button (I) (Fig. 21). Move it
to the other side, inserting it in the dedicated
diagonal belt guide (Fig. 22).
The rigid FixPlus clasps are designed to improve
the levels of comfort and stability of the child car
seat. It is possible to use the Oasys FixPlus child
car seat without these optionals, if you encoun-
ter problems installing them in your car.
22
IN
VE
Wh
ch
hic
the
be
in t
HO
CH
Re
be
RE
WA
sea
1. R
2. U
g
If t
car
fro
1. P
l
f
o
i
2. H
c
c
HO
Oa
an
To
25
SA
atio
ba
To
atio
IN
HO
Th
rig
wh
you

Publicité

loading