Step 9 - Install Range Hood - Haier HCH6500ALS Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEP 9 - INSTALL RANGE HOOD

Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
1. Before mounting the range hood, plug the range hood into a grounded 3 prong
outlet to test all functions for proper operation.
Blower works at all speeds.
Lights turn on and off.
The damper flaps open when the blower is on.
2. Position the range hood so that the controls are toward the front. Then, with two
people lifting, raise the hood up and over the lower section of the vent structure.
3. Hold the range hood in position, while the third person fastens the range hood to
the vent structure.
16
WARNING
Excessive Weight Hazard
WARNING
Electrical Shock Hazard

Publicité

Table des Matières
loading

Table des Matières