Installation Instructions; Step 1 - Unpack Range Hood - Haier HCH6500ALS Guide De L'utilisateur

RECOMMENDED GROUNDING METHOD
A 120 volt, 60 Hz, AC only, 15-amp fused, grounded electrical supply is required. Use
an outlet that cannot be turned off by a switch. Do not use an extension cord.
NOTE: Before cleaning, or removing a light bulb, turn vent hood off, and then
disconnect the vent hood from the electrical source. When you are finished,
reconnect the vent hood to the electrical source.

INSTALLATION INSTRUCTIONS

Disconnect power before installing unit.
Failure to do so can result in death, fire, or electric shock.
Disconnect power before installing range hood.

STEP 1 - UNPACK RANGE HOOD

1. Select a flat surface for assembling the range hood and cover the surface.
Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
2. Using two or more people, lift the range hood onto the covered surface.
3. Separate the two-sections of the vent structure.
4. Remove the tape from the damper flaps.
8
WARNING
Electrical Shock Hazard
WARNING
Excessive Weight Hazard