Step 8 - Install Decorative Vent Covers - Haier HCH6500ALS Guide De L'utilisateur

STEP 8 - INSTALL DECORATIVE VENT COVERS

1. Attach 6" metal vent duct (not provided) to the prepared ductwork in the ceiling.
Seal all seams.
a
2. Separate the two sections of the vent cover.
NOTE: Remove the white film from the vent covers, as needed, prior to
assembly and installation. Handle the vent covers gently to avoid scratching the
finish.
3. Using the screws (provided), fasten the upper section of the vent cover to the
top of the vent structure.
a
14
a
Flexible Metal
Vent Duct
a
a
Phillips Self-
drilling Screws