Publicité
Les langues disponibles
Les langues disponibles
Récepteur
Si vous souhaitez poser votre récepteur sur un meuble,
Installation Instruction (continued)
positionnez le support comme sur la figure 1.
Si vous préférez monter le récepteur sur le mur, retirez le
Receiver
support et procédez selon les étapes présentées sur la figure 2:
Receiver
1. If you would like to put your
1. If you would like to put your
- Installer les deux vis auto-taraudeuses à une distance de 60
install the bracket as figure 1.
install the bracket as figure 1.
mm l'une de l'autre et placées sur une ligne horizontale.
- Faire glisser lentement l'appareil jusqu'à ce qu'il se mette en
2. If you prefer to mount the
2. If you prefer to mount the
place.
the bracket and do the following steps as figure 2.
the bracket and do the following steps as figure 2.
a. Install the two self-tapping screws at a distance of 60mm from
a. Install the two self-tapping screws at a distance of 60mm from
each other and located on a horizontal line.
each other and located on a horizontal line.
b.
Slowly slide the unit down until it snaps into place.
b.
Slowly slide the unit down until it snaps into place.
Figure 1:
Figure 1:
8
Figure 1
8
Figure 2
Figure 2
Figure 2
Installation Instruction (continued)
receiver
on the desktop, please
receiver
on the desktop, please
receiver
on the wall, please remove
receiver
on the wall, please remove
Mounting
Mounting
Broches de
pins
pins
montage
FR
7
Publicité
