Product Presentation; Description; Reminders And Advice - CDVI PROMI1000PC Manuel D'installation

Centrale de gestion double technologie
Masquer les pouces Voir aussi pour PROMI1000PC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION MANUAL
PROMI1000PC
One door double technology controller (Proximity and Digicode

1] PRODUCT PRESENTATION

A . Description
Free software.
Built-in Proximity card reader.
2 relay outputs.
Self contained.
1000 events stored in memory buffer.
Operating mode set with 5 schedules.
1000 proximity tags and 1000 user codes.
Up to 16 holidays.
Anti-passback.
PC connection.
Tamper switch.
3 operating modes:
- Badge + User code (Double security),
- Badge only,
- Badge or user.
Visual and audible signalling.
Dimensions (L x W x D): 145 x 80 x 28 mm.
Date and time saving with a CR1225 3V battery.
Date and time management.
Snap-off EPROM memory.
An auxiliary reader able to be moved
to a distance of 50m.
1 request-to- exit input.
1 door lock relay N/O & N/C contact 3 A/125V ac.
1 alarm relay output N/O contact RT 3 A/125V ac.
5-digit programmable master code.
Door status switch controlling the alarm.
Input voltage: 12V ac/dc.
Consumption: 300mA.
Printing of events, confi guration and complete
list of tags and codes, in order of occurrence
(PROMI1000PC).
B. REMINDERS AND ADVICE
This product is supplied with a varistor. It should be fi tted directly on the lock terminals (electro-
magnetic lock, electric release, etc) controlled by the equipment. If the appliance operates with many
locks, each one must be fi tted with a varistor. It limits voltage surges (back EMF) caused by the coil
of the lock (strike, electro-magnetic locks, retrofi t housings or handles, solenoid lock bolts or motorised locks).
In the case of a Sherlock electro-magnet (Shear Lock), it should be powered with a separate power
supply independent from the PROMI1000PC.
)
®
80
Recommended
power supplies
ARD12
BS60
In conformity with European directive R&TTE 99/5/CE
and according to the harmonised standards: ETS 301 489
and ETS 300-330-1-Ed 2001. In conformity with the EMC
standards applied: EN 50133, EN 50130-4.
28
148
DEEE & RoHS
IP53
Certifi cation R&TTE
Certifi cation CE
-10°C to +70°C
cdvi.com
3
cdvigroup.com

Publicité

Chapitres

Table des Matières
loading

Table des Matières