Product Presentation; Reminders And Recommendations - CDVI MOONARWB Mode D'emploi

INSTALLATION MANUAL
MOONARWB
Flush-mount 125Khz proximity Reader
Thank you for buying our products and for the confi dence you placed
in our company.

1] PRODUCT PRESENTATION

Wiegand 26, 30 or 44 bit.
Flush-mount with embedding box (supplied).
Direct connection or with the door controller
(INTBUSW).
Audible and visual feedback.
Comes with a black and a white front plate.
Dimensions (L x W x D): 92 x 84 x 12,5mm.
Technology: 125 Khz.
Multi card protocol reader - Marin/HD.
Input voltage: 12V dc.
Consumption: 80mA.
WEEE
IP52
CE Certifi cation
-25°C to +70°C

2] REMINDERS AND RECOMMENDATIONS

Important
To protect the device from back-emf, do not forget
to install the varistor across the lock terminals,
in parallel.
Suggested power supplies
ARD12 & BS60 (in case the reader is powered
neither by the controller nor by the reader control-
ler INTBUSW). These products must be powered
in 12Vdc and the power supply should be certifi ed
EN60950-1:2006/A11:2009 standards and should
be designed to be a limited power supply source.
Recommended cables
4 twisted pairs 0.6mm (AWG 24).
2
cdvigroup.com
Recommended
Power supplies
ARD12 BS60
Environment
When in a humid area or close to the sea,
we recommend applying varnish to the terminals
to avoid oxidation.
This product is supplied with a varistor.
The varistor must be connected directly
to the locking system terminals (electric strikes,
electromagnet, or lock) operated by the device.
If the device functions with several locking
systems, each one must be fi tted with a varistor.
The varistor limits overload produced by the strike
coil, known as self-effect or back-emf. If you are
using a "Shear Lock", electromagnet or other type
of electric lock, we recommend the use
of a dedicated power supply for the lock.
92
R15mm
Ø 67
EN