Product Presentation; Reminders And Recommendations; Mounting Kit - CDVI NANOPW Manuel D'installation

MANUEL D'INSTALLATION
NANOPW - NANOPB
Lecteur Proximité Wiegand 125 Khz
Thank you for buying our products and for the confi dence you placed
in our company.

1] PRODUCT PRESENTATION

Wiegand 26 bit.
Direct connection.
PCB sealed in epoxy.
Audible and visual feedback.
45cm pigtail wire connection.
Versions available: white, black or grey.
L x W x D: 70 x 43 x 23mm.
Technology: 125 Khz.
Multi card protocol reader - Marin/HD.
Input voltage: 12V dc.
Consumption: 100mA.

2] REMINDERS AND RECOMMENDATIONS

Important
To protect the device from
back-emf, do not forget to install
the varistor across the lock
terminals, in parallel.
For optimal illumination, do not
fold the cable inside the product.
Keep at least 20CM (8") between
2 card readers.
Suggested power supplies
ARD12 & BS60. In case the
reader is powered neither by
the controller nor by the reader
controller (INTBUSW).

3] MOUNTING KIT

Foam seal
NANOPW(PB) 1
Recommended cables
4 twisted pairs 0.6mm (AWG 24).
Environment
When in a humid area or close to
the sea, we recommend applying
varnish to the terminals to avoid
oxidation.
This product is supplied with
a varistor.
The varistor must be
connected directly to the locking
system terminals (electric
strikes, electromagnet, or lock)
3x30 S5
TF screw Plastic anchor
2 2
operated by the device. If the
device functions with several
locking systems, each one must
be fi tted with a varistor.
The varistor limits overload
produced by the strike coil,
known as self-effect or back-emf.
If you are using a "Shear Lock",
electromagnet or other type of
electric lock, we recommend
the use of a dedicated power
supply for the lock.
3x8
TORX bit
®
TORX screw
®
1 1
cdvigroup.com
FR
CE Certifi cation
Certifi cation FCC CFR 47
part 15 compliance
WEEE
-25°C to +70°C
IP53
Varistor
1
cdvi.com
7