Door Release Time; Alarm Time Delay; Anti Pass-Back; Master Code - CDVI PROMI1000PC Manuel D'installation

INSTALLATION MANUAL
PROMI1000PC
One door double technology controller (Proximity and Digicode
Schedules:
- For each schedule enter the start time, the end time and days.
- Enter the time "00:00 00:00" in 24 hour format and select the day.
- Thick the box of each day.
- The Promi1000PC authorises or does not authorise access to a door; it is in the access part
that we can defi ne the opening modalities and the connection to the software.

Door release time

- Select the time from the drop list from 1 to 99 seconds.
- For a latch output select that option in the drop list.

Alarm time delay

- If a door contact is connected to the PROMI1000PC then select the time before it is triggered
(10 to 99 seconds)
- If there is no door contact then select the "no alarm" option.

Anti pass-back

- Activate, or do not activate the anti pass-back on the PROMI1000PC by choosing "Yes" or "No".
- If the anti pass-back is active then it is compulsory to add the remote reader in the installation.

Master code

This is the master access code of the PROMI1000PC. This code must be defi ned and must be different
from a user access code. It can be use to get access by entering the master code twice.
Note: the code stored in the PROMI1000PC is requested on connection if it is different from the one entered.

Password

The software password is optional; by default it is blank (no password).
IMPORTANT: This password will be requested at the next connection.
Note: The green or red led indicates whether the confi guration is up to date in the Promi1000PC or not.

Automatic Daylight saving

If this option is active then the PROMI1000PC will automatically change the internal time clock
according the European dates.
cdvi.com
14
cdvigroup.com
)
®