KitchenAid 5KFPM770 Mode D'emploi Et Recettes page 38

Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
2. Fit the disc over the metal pin on
the disc stem with the raised-blade
side up. The disc has a raised nub
on the top and grooves
underneath to help align it
properly. Rotate the disc until it falls
fully onto the stem.
Mini Bowl Assembly
1. Place the mini bowl inside the
work bowl over the power shaft.
Rotate the mini bowl until it falls
into place. When properly seated
in the work bowl, the mini bowl
cannot be rotated.
2. Fit the mini blade on the power
shaft. It may be necessary to rotate
the blade until it falls into place.
The mini bowl can also be placed
in the chef's bowl in a similar
manner.
3. To remove the mini bowl after
processing, lift the bowl using
the two finger grips located
along the top edge of the bowl.
Chef's Bowl Assembly
Place the chef's bowl inside the
work bowl over the power shaft.
Rotate the chef's bowl until it falls
into place. When properly seated in
the work bowl, the chef's bowl
cannot be rotated.
The chef's bowl can only be used
with the slicing and shredding discs
– the multipurpose blade cannot be
used. To remove the chef's bowl
after processing, lift the bowl using
the two finger grips located along
the top edge of the bowl.
Continued on next page
9